OTC 3358 Ready Scan Readiness Monitor Tool

OTC 3358 Ready Scan Readiness Monitor Tool Review

OTC 3358 Ready Scan Readiness Monitor Tool Feature

• A drive cycle is required after any emissions related repair
• Eliminates drive cycle guesswork by notifying any driver or customer with color coded LEDs and built in speaker that the drive cycle has been completed and the vehicle is ready
• Once the vehicle's OBD II system is ready repair work is confirmed
• The compact tool works on 1996 and newer OBD II and CAN compliant vehicles
• Heat-resistant over molding on battery clips and blow-molded case

OTC Ready Scan Readiness Monitor Tool is a drive cycle that is required after any emissions related repair. The Ready Scan eliminates drive cycle guesswork by notifying any driver, or your customer - with color coded LEDs and built in speaker that the drive cycle has been completed and the vehicle is ready. Once the vehicle's OBD II system is ready, repair work is confirmed. If a state emission inspection is required, a retest can then be performed. The compact tool works on 1996 and newer OBD II and CAN compliant vehicles. The easy to install, no set up required and connects easily into the vehicle's OBD II connector and is able to display status in 15 seconds. Features: bright color coded LED's provide readiness status, green LED vehicle is ready, built in speaker provides audible tone every 5 minutes when vehicle becomes ready, Ready Scan is powered from the vehicle no batteries required and rugged poly carbonate housing has molded grips.

Innovate Motorsports 3807 LM-2 Digital Dual Air/Fuel Ratio Wideband Meter (2 O2 Sensors) and OBD-II Scan Tool

Innovate Motorsports 3807 LM-2 Digital Dual Air/Fuel Ratio Wideband Meter (2 O2 Sensors) and OBD-II Scan Tool Review

Innovate Motorsports 3807 LM-2 Digital Dual Air/Fuel Ratio Wideband Meter (2 O2 Sensors) and OBD-II Scan Tool Feature

• Patented Direct Digital Wideband Technology
• Wideband O2 Compatible with ALL fuel types
• OBD-II Scan tool- read/clear DTCs and log up to 16 channels of CAN OBD-II Data

The LM-2 combines an (Dual Channel) air/fuel ratio meter, a full-function 32-channel datalogger, and powerful software to deliver a complete tuning workshop for less than the cost of one dyno day. Whether you have a piggy-back fuel controller, race carb, aftermarket ECU, ODB-II tuning software, or a flash/chip programmer, an LM-2 is the tool you need to dial in maximum HP. The digital signal processing technology provides data on exactly how rich or lean an engine is running at any load. The LM-2 has a self-calibrating circuitry also compensates for changes in temperature, altitude, and sensor condition.

AutoLink CAN OBDII Code Reader

AutoLink CAN OBDII Code Reader Review

AutoLink CAN OBDII Code Reader Feature

• Works with all 1996 and later Domestic, European, and Asian Vehicles (CAN/OBD-II/EOBD compliant)
• ? Live Data - Displays complete OBDII vehicle data stream
• ? Displays Diagnostic Trouble Code (DTC) and Pending Code definitions on unit screen
• ? Easily determines the causes of the "Check Engine Light (MIL)"
• ? Retrieves generic (P0 and U0), manufacturer specific (P1, P3, and U1) codes, and pending codes

The AutoLink® AL309 CAN OBDII/EOBD Code Reader, specially developed for the US Market, provides easy and quick access to Diagnostic Trouble Codes and their definitions on all OBDII compliant vehicles sold worldwide since 1996. Even though this tool provides the features that professional technicians require it is priced like a DIY tool at less than . It checks readiness status for inspections, shows live data using ALL AVAILABLE PIDS, provides Code Descriptions, and even Pending codes. Features like this in other DIY tools cost 0 or more. ? Turns off Check Engine Light (MIL), clears codes and resets emissions monitors ? Views freeze frame data ? Displays monitor and Inspection Maintenance (I/M) readiness status ? Multilingual menu and DTC definitions - English, Spanish and French ? Retrieves vehicle information (VIN, CIN and CVN) ? Supports CAN (Controller Area Network) and all other current OBD-II protocols ? USB Update Cable and User Manual included ? FREE Online Software Updates via USB Interface ? Limited One (1) Year Warranty ? Live Technical Assistance

Autel MaxiTrip TP100 4-In-1 Auto Computer

Autel MaxiTrip TP100 4-In-1 Auto Computer Review

Autel MaxiTrip TP100 4-In-1 Auto Computer Feature

• Semi-permanent dashboard mountable design featuring four functions: trip computer, digital gauges, scan tool and vehicle black box
• Trip computer real-time information monitoring including average trip MPG, tank MPG, average speed, average speed per tank of gas, miles to empty, and miles driven on tank
• Digital gauge functionality featuring the ability to monitor up to four different sets of information simultaneously
• Scan tool functionality including reading and clearing trouble codes on OBD-II/EOBD compliant vehicles, freeze frame data and the ability to turn off check engine light (MIL)
• Vehicle 'black box' functionality including up to 300 hours of driving data storage space, covering a variety of data points

The MaxiTrip TP100 4-In-One Auto Computer from Autel is an innovative on board vehicle diagnostic device that combines real-time engine monitoring, failure prevention and trip tracking in a single, semi-permanent dashboard mountable device. Perfect for everyone from auto enthusiasts and do-it-yourselfers to parents of young drivers, business owners and anyone looking to maximize fuel efficiency, the unit taps into your vehicle's onboard computer via a standard 16-pin OBD-II data link connector (DLC). This is usually under the driver's side dashboard, but the TP100 can be placed unobtrusively wherever it's most convenient, safe and visible. The data points it measures break down into four distinct use categories: trip computer, digital gauges, scan tool and vehicle "black box".

Used as a trip computer, the MaxiTrip TP100 functions as a compact calculation device designed to monitor information pertaining to your vehicle's performance in real time. In this mode, it will display such useful information as data point variants related to maximum speed, driving distance, distance to empty, average speed, fuel used, time to empty, driving time, trip fuel economy and fuel to empty. Closely related to this function is the TP100's use as a digital gauge device. Useful as a supplement to your car's existing dashboard gauges, these gauges can be configured to measure and monitor up to four different sets of information simultaneously, providing real-time engine performance analysis, allowing you to adjust driving behavior immediately and save gas. Just a few of the gauges that can be displayed are: vehicle speed, engine load, RPM, ignition timing, intake air temperature, battery voltage, and many more. Once your trip is over, the TP100 serves a black box recorder for your vehicle, providing a high level view of activity. Users will be able to save up to 300 hours of driving data for later analysis including data points like time and date for each trip, maximum speed during trip, distance traveled, time overspeed, and more.

Finally, the TP100 also functions as a scan tool, useful for troubleshooting check engine light/Malfunction Indicator Light (MIL) instances through the ability to view Diagnostic Trouble Codes (DTCs) on OBD-II/EOBD compliant vehicles. OBD-II is the second generation of onboard diagnostics standard for cars and trucks and has been a mandatory requirement for all vehicles sold in the US since 1996, both domestic and imports. EOBD is its European counterpart, required on gasoline models since 2000 and diesel models since 2003. This extensive vehicle coverage means that the vast majority of cars on the road today can utilize the TP100 for initial diagnosis of issues as they happen. Along with its DTC functionality TP100 also includes many other functions including: the ability to view freeze frame MIL-related data recorded by vehicle computers, the retrieval of vehicle information (VIN, CIN and CVN), and the ability to read and clear trouble codes and MIL indicators.

This innovative 4-in-one automotive computer from Autel is exactly what is needed for real-time engine monitoring, failure prevention and trip tracking. The compact and intelligent gadget includes four most useful modes namely, trip computer, digital gauges, scan tool and vehicle black box. It is a compact automotive computer designed to monitor information about the vehicle in real time as well as displays useful information such as average trip MPG, tank MPG, average speed per trip, average speed per tank of gas, miles to empty, miles driven on tank and more. This maxitrip can be configured to measure and monitor up to four different sets of information simultaneously, providing real-time engine performance analysis, allowing one to adjust driving behavior as well as save gas. It works as a scan tool that is able to help one troubleshoot problems of all OBD2/EOBD compliant vehicles and works as a vehicle black box to store every trip one makes.

V1.4 ELM327 OBD2 CAN-BUS Diagnostic Interface Scanner

V1.4 ELM327 OBD2 CAN-BUS Diagnostic Interface Scanner Review

V1.4 ELM327 OBD2 CAN-BUS Diagnostic Interface Scanner Feature

• Very user-friendly, easy to learn, and easy to install.
• The processor is an ELM327.
• The output protocol (connection to laptop) is USB.
• The software supports two platforms - DOS and Windows?not include Windows 7?.
• Read diagnostic trouble codes, both generic and manufacturer-specific, and display their meaning (over 3000 generic code definitions in the database).

Features:
Very user-friendly, easy to learn, and easy to install.Package including:
1 * ELM327 USB interface
1 * CD software
The processor is an ELM327.
The output protocol (connection to laptop) is USB.
The software supports two platforms - DOS and Windows?not include Windows 7?.
Read diagnostic trouble codes, both generic and manufacturer-specific, and display their meaning (over 3000 generic code definitions in the database).
Clear trouble codes and turn off the MIL ("Check Engine" light).
Display current sensor data, including:
Engine RPM
Calculated Load Value
Coolant Temperature
Fuel System Status
Vehicle Speed
Short Term Fuel Trim
Long Term Fuel Trim
Intake Manifold Pressure
Timing Advance
Intake Air Temperature
Air Flow Rate
Absolute Throttle Position
Oxygen sensor voltages/associated short term fuel trims
Fuel System status
Fuel Pressure
Many others...
Specifications:
OBDII Protocols:
ISO15765-4 (CAN)
ISO14230-4 (KWP2000)
ISO9141-2
J1850 VPW
J1850 PWM
Output protocol: RS232
Baud rate: 9600 or 38400
Indicator LEDs: OBD Tx/Rx, RS232 Tx/Rx, Power
Operating voltage: 12V, internal protection from short circuits/overvoltages
Nominal idle current: 45mA
Color: Back + Orange + Blue
Item Size: 8.8 * 4.6 * 2.5cm
Package Size: 20 * 15 * 2.5cm
Item Weight: 130g
Package Weight: 139g
USB Cable Length: 176.5cm
including:
1 * ELM327 USB interface
1 * CD software

XiTech XR7 OBD-II PC Based Advanced CAN Bus Scan Tool

XiTech XR7 OBD-II PC Based Advanced CAN Bus Scan Tool Review

XiTech XR7 OBD-II PC Based Advanced CAN Bus Scan Tool Feature

• USB-CAN Bus Interface
• Read & Erase Trouble Codes - View Live Data
• Backwards Compatible with other "Elm327"tm Software Packages
• 3 Yr Limited Warranty

The XR-7 is the latest PC-based USB scan tool. It supports all OBD-II protocols and it works with a number of compatible programs. This Elm Compatible Interface allows you to connect your car to your PC/Laptop via USB and troubleshoot any problems in your vehicle by reading the Diagnostic Trouble Codes (DTC's) that appear when the "check engine" light is showing. Besides displaying DTC codes, it will allow you to scan live data right from your car's computer. Our XR-7 interface works on the following protocols: * SAE J1850 - PWM * SAE J1850 - VPW * ISO 9141-2 * ISO 14230-4 - KWP 2000 * ISO 15765-4 / SAE J2480 - Controller Area Network (CAN)

EASE OBD II Generic PC Scan Tool Software Add-on for Bosch Flasher Pro J2534 Reprogrammer - Version 10

EASE OBD II Generic PC Scan Tool Software Add-on for Bosch Flasher Pro J2534 Reprogrammer - Version 10 Review

EASE OBD II Generic PC Scan Tool Software Add-on for Bosch Flasher Pro J2534 Reprogrammer - Version 10 Feature

• Use your Bosch Flasher Pro Reprogrammer as a PC Scan Tool.
• No need to buy two systems - perform reprogramming and diagnostics using a single interface.
• Read OBD II Generic data & DTCs from 1996+ Domestic, Asian and European cars and light trucks
• Full expanded Generic PID support and custom PIDs like Rich/Lean Status, Engine Vacuum, Acceleration
• Enhanced DTC scan and description library. Read permanent DTCs (Mode {ItemFeatures}A/10). Mode 6 and 9 Support.

Did you know that you could use your Bosch Flasher Pro Reprogrammer for more than just on-board reprogramming? You can use your Flasher Pro as a scan tool interface with the EASE Version 10 PC Scan Tool Software Add-on. When you combine the power of the EASE PC Scan Tool with the Flasher Pro Reprogrammer you can scan and reflash using a single interface. The EASE PC Scan Tool offers more software features than any other scan tool. Vehicle information is presented in a user friendly format that you can quickly navigate through to find what you need to get the vehicle fixed right - the first time. With the EASE PC Scan Tool, you'll see loads of vehicle data in a user-friendly format on your large PC screen so you can quickly see the whole picture - making your job much easier. Features: View vehicle data in grid, graph or meter format; Full expanded Generic PID support - 140+ PIDS; Plus EASE custom PIDS like Rich/Lean Status, Engine Vacuum and Acceleration; Read and clear Generic and Manufacturer Specific DTCs, Freeze Frame, I/M monitors and MIL; High definition graphing with up to 6 graphs, auto-scale, zoom and pan; Overlay PIDS on a graph; Unlimited record capability with snapshots and markers; Read VIN and CAL ID with Mode 9 support; find misfires with Mode 6 support; Fast data sampling modes; Print reports; Includes DTC, acronym and parameter libraries and much more. The EASE Scan Tool software is easy to install and use on your Windows desktop or laptop PC. The OBD II Generic PC Scan Tool Software Add-on supports OBD II Generic Data for all USA OBD II compliant vehicles - typically 1996 and newer GM, Ford, Chrysler, Asian and European vehicles. This item includes the EASE Version 10 OBD II Generic Scan Tool Installation DVD, one software access code and one year of support. Requires: A Windows PC with free USB port, Bosch Flasher Pro Unit & Cables.

Genisys 3875 EVO USA 2011 OBD II Kit

Genisys 3875 EVO USA 2011 OBD II Kit Review

Genisys 3875 EVO USA 2011 OBD II Kit Feature

• Genisys EVO featuring the new System 5.0 with Code-Assist experienced-based Confirmed Fixes from Identifix
• New USA 2011 Domestic and Asian with ABS and European 2010 software
• Including Pathfinder Repair-Trac Fast Fixes information, Infotech Component information and Software Automated System Test
• OBD II smart cable
• OEM cables may be required for certain vehicle system functions

Includes Genisys EVO featuring the new System 5.0 with Code-Assist experienced-based Confirmed Fixes from Identifix, new USA 2011 Domestic/Asian with ABS and European 2010 software including Pathfinder, Repair-Trac, Fast Fixes information, Infotech Component information software, Automated System Test, OBD II smart cable, manuals, and carrying case. OEM cables may be required for certain vehicle system functions. Additional OEM cables are available individually or in convenient kits such as USA Domestic OEM cable kit 3421-70, Asian OEM cable kit 3421-94, European OEM cable kit 3421-75 and ABS/Airbag OEM cable kit 3421-54.

OTC 3108 PocketScan Code Reader

OTC 3108 PocketScan Code Reader Review

OTC 3108 PocketScan Code Reader Feature

• PocketScan code reader is an advanced DTC diagnostic tool
• Automatically reads DTC feets when connected for fast diagnostics
• Provides Freeze Frame VIN info and performs the important task of (I/M) inspection and Maintenance-readiness testing by displaying the I/M readiness monitor status
• Small size makes it perfect for tow trucks or service vehicles as well as home use
• OBD II cable (attached) and operational manual is included

The OTC 3108 PocketScan Code Reader is an advanced DTC diagnostic tool. DTC’s and descriptions are just a start of the tasks it can handle. This professional tool also provides Freeze Frame, VIN info and performs the important task of (I/M) inspection and Maintenance-readiness testing by displaying the I/M readiness monitor status. Measuring in at just 2 inch wide x 3.18 inch high and 65inch deep is great for use before and after repairs are made. The small size makes it perfect for tow trucks or service vehicles as well as home use. This Pocket Scanner additional features are automatically reads DTC feets when connected for fast diagnostics, displays OBD II generic code definitions, reads and displays DTCs, erases DTCs, reads and displays MIL status, and pending codes. OBD II cable (attached) and operational manual is included.

Automotive ODB OBD Ii 2 Obd2 Obdii Diagnose Code Reader Scanner Scan Tool Vs600

Automotive ODB OBD Ii 2 Obd2 Obdii Diagnose Code Reader Scanner Scan Tool Vs600 Review

Automotive ODB OBD Ii 2 Obd2 Obdii Diagnose Code Reader Scanner Scan Tool Vs600 Feature

• Item will be shipped from china and will take about 10-20 working days to arrive.
• Contents Included?
• MAIN SCANNER unit
• OBD2 Cable (1.5M)
• User's Manual

Item will be shipped from china and will take about 10-20 working days to arrive. Brief Introduction:

Saves time and money on repairs- find out what's wrong prior to repairing and verify a repair after servicing

Wider vehicle coverage with CAN Protocol support

Turns off check engine light(MIL), Erases Diagnostic Trouble Codes (DTCs) and resets OBD2 monitor status

More features for less-Reviews the emission readiness status of OBD monitors, retrieves VIN on 2002 and newer vehicles, and more

Determines the malfunction indicator lamp (MIL) status

Keeps engine performance in good shape with regular inspections and prevents future costly repairs

Helps to identify problems with a used vehicle before buying or selling



Function Description

Works with all 1996 and later OBDII / EOBD compliant vehicles

Scans for Diagnostic Trouble Codes (DTC) - The cause of the 'Engine Malfunction Indicator Light' (MIL)

Scans for pending DTCs

Retrieves generic (P0, P2, P3 & U10) and manufacturer specific (P1, P3 & U1) DTCs

Turns off MIL light, clears DTCs and resets monitors

Displays DTC definitions on screen

View freeze frame data

Displays monitor and I/M readiness status (emissions)

Retrieves vehicle information (VIN, CID & CVN)

Supports CAN and other current EOBD Protocols

Reads live ECU/PCM data stream

Displays live O2 sensor data

Graphing function for live data (96on)

Read, store and playback live sensor data

Performs 'modules present' test

Internal battery back-up for off-vehicle data review/analysis

Print out data via PC

Update software and libraries via the internet

Built-in EOBD library lookup

Large, easy-to-read LCD display

Back-lit screen

Easy-to-use

EASE OBD II Generic PC Scan Tool Software Add-on for Drew Tech CarDAQ-Plus J2534 Reprogrammer - Version 10

EASE OBD II Generic PC Scan Tool Software Add-on for Drew Tech CarDAQ-Plus J2534 Reprogrammer - Version 10 Review

EASE OBD II Generic PC Scan Tool Software Add-on for Drew Tech CarDAQ-Plus J2534 Reprogrammer - Version 10 Feature

• Use your Drew Tech CarDAQ-Plus Reprogrammer as a PC Scan Tool.
• No need to buy two systems - perform reprogramming and diagnostics using a single interface.
• Read OBD II Generic data & DTCs from 1996+ Domestic, Asian and European cars and light trucks
• Full expanded Generic PID support and custom PIDs like Rich/Lean Status, Engine Vacuum, Acceleration
• Enhanced DTC scan and description library. Read permanent DTCs (Mode {ItemFeatures}A/10). Mode 6 and 9 Support.

Did you know that you could use your Drew Tech CarDAQ-Plus Reprogrammer for more than just on-board reprogramming? You can use your CarDAQ-Plus as a scan tool interface with the EASE Version 10 PC Scan Tool Software Add-on. When you combine the power of the EASE PC Scan Tool with the CarDAQ-Plus Reprogrammer you can scan and reflash using a single interface. The EASE PC Scan Tool offers more software features than any other scan tool. Vehicle information is presented in a user friendly format that you can quickly navigate through to find what you need to get the vehicle fixed right - the first time. With the EASE PC Scan Tool, you'll see loads of vehicle data in a user-friendly format on your large PC screen so you can quickly see the whole picture - making your job much easier. Features: View vehicle data in grid, graph or meter format; Full expanded Generic PID support - 140+ PIDS; Plus EASE custom PIDS like Rich/Lean Status, Engine Vacuum and Acceleration; Read and clear Generic and Manufacturer Specific DTCs, Freeze Frame, I/M monitors and MIL; High definition graphing with up to 6 graphs, auto-scale, zoom and pan; Overlay PIDS on a graph; Unlimited record capability with snapshots and markers; Read VIN and CAL ID with Mode 9 support; find misfires with Mode 6 support; Fast data sampling modes; Print reports; Includes DTC, acronym and parameter libraries and much more. The EASE Scan Tool software is easy to install and use on your Windows desktop or laptop PC. The OBD II Generic PC Scan Tool Software Add-on supports OBD II Generic Data for all USA OBD II compliant vehicles - typically 1996 and newer GM, Ford, Chrysler, Asian and European vehicles. This item includes the EASE Version 10 OBD II Generic Scan Tool Installation DVD, one software access code and one year of support. Requires: A Windows PC with free USB port and Drew Tech CarDAQ-Plus Unit & Cables.

Actron CP9190 Elite AutoScanner Pro Diagnostic Code Scanner Kit (Includes CP9185 Base Scanner, OBDI & OBDII Cables with Hard Case)

Actron CP9190 Elite AutoScanner Pro Diagnostic Code Scanner Kit (Includes CP9185 Base Scanner, OBDI & OBDII Cables with Hard Case) Review

Actron CP9190 Elite AutoScanner Pro Diagnostic Code Scanner Kit (Includes CP9185 Base Scanner, OBDI & OBDII Cables with Hard Case) Feature

• Kit includes CP9185 base tool
• Reads, displays and erases generic, manufacturer specific and displays emissions readiness status
• Retain the most recently scanned vehicle’s data and configuration
• Displays summary recap of the vehicle’s emissions status
• Resets check engine light

The Actron CP9190 OBD II/I Elite AutoScanner Pro Diagnostic Code Scanner is an enhanced scan tool that is loaded with many professional features. If you are new to diagnostic scanners, this handy tool connects to your vehicle, scans various parts of your car, truck or SUV, and retrieves a list of diagnostic trouble codes (DTCs) and code definitions from your vehicle's computer. But even if you're a veteran to scanners and auto repair, you'll be impressed with the new functionality that Actron has added to the CP9190. This device not only scans your vehicle, it also allows you to freeze-frame live timing and pinpoint your vehicle's problem. Instead of having to recreate a scenario over and over again, you can now playback the timing to scrutinize all the data and make a clear diagnosis. Combine this with Internet connectivity and the ability to interface with a PC, and you have a powerful, professional diagnostic scanner in the palm of your hand. Like its little brother, the Actron CP9180, the CP9190 is compatible with all OBD II (On-Board Diagnosis II) compliant vehicles manufactured in North America, Asia, and Europe from 1996 to the present, but the Elite AutoScanner goes a step further and is even compatible with certain pre-1996 GM, Ford, and Chrysler vehicles.

The Actron CP9185 base unit easily scans and retrieves DTCs.

TrueLink Technology assures a fast and accurate diagnostic output.

The Elite AutoScanner comes loaded with cables and a hard case.

In addition, the CP9190 fully updateable via the Internet, so it is designed to accommodate future vehicles as well. The device features a large, graphic, easy-to-read backlit screen that shows the trouble code and its definition. And although you still have to fix the problem that your scanner detects, this device will deactivate the "check engine" light on your dash so you'll no longer be distracted while you drive. Every Actron scan tool and code reader incorporates CAN (Controller Area Network) and the patented TrueLink Technology which guarantees the tool will link to and communicate with every OBD II compliant vehicle. This assures a fast and accurate diagnostic output -- a key ingredient to an effective repair.

The CP9190 is simple and easy to use. The included OBD I/II cables provide both data and power connections, while the USB cable offers a quick and easy way to connect your scanner to your PC. In addition to connecting to the computer for Internet updates, you'll also appreciate the CP9190's USB connectivity because it makes printing DTCs and other information a breeze. Once the scanner is connected to your vehicle, the user friendly menu provides a variety of information in a snap. This device displays OBD II enhanced functionality with graph data (1996 and newer), O2 monitor tests, state emissions, and even reads, records and displays live sensor data so you know what's happening with your vehicle as you make adjustments. Other features include an OBD II code library built right into the tool, an OBD II drive cycle mode, battery power so you can review diagnostic data even when the scanner is disconnected from your vehicle, and a trilingual (English, Spanish, French) mode.

Another important thing to remember is that all emission testing facilities will fail a vehicle that has the "check engine" light illuminated at the time of the test -- even if it is only lit to remind you of a past-due oil change or 60,000-mile tune-up. With this scanner, you can shut off the check engine light and pass the emissions test on your terms. The menu also alerts you of any pending DTCs and reads the Malfunction Indicator Lamp (MIL) status. By reading the MIL status the scanner gives insight into what might cause your "check engine" light to turn on in the near future. In this way, the scanner also provides some preventive measures to help you keep a close eye on your vehicle's systems. These functions, combined with the simple keypad used to read, erase, and navigate DTCs, make the CP9180 scanner a perfect solution for identifying problems with your vehicle and keeping you safe on the road.

What's in the Box
Actron CP9185 OBD II/I Elite AutoScanner Pro diagnostic code scanner, OBD II cable, GM OBD I ALDL cable, Ford OBD I MCU/EEC- IV cable, Chrysler OBD I SCI cable, USB cable, 8-foot extension cable, cigarette lighter adapter, blow molded hard case, manual, professional companion CD, batteries, and registration card.

HARDWARE FEATURES	CP9125	CP9410	CP9175	CP9180	CP9185	CP9190
Detachable cable
Back lit display
USB cable included for online update
Soft carrying case
Blow molded storage case
SOFTWARE FEATURES	CP9125	CP9410	CP9175	CP9180	CP9185	CP9190
Updateable online
On-screen code definitions
Battery low indicator
Review data off vehicle
Code lookup on tool
Record and playback live sensor data
Print data
Display graphing data
Urgency Indicators
OBD II ENHANCED	CP9125	CP9410	CP9175	CP9180	CP9185	CP9190
1996 and newer GM, Ford and Chrysler enhanced DTCs
OBD II GENERIC	CP9125	CP9410	CP9175	CP9180	CP9185	CP9190
Read codes, pending codes and erase codes
MIL status (malfunction indicator lamp)
I/M readiness monitor status (emissions)
View freeze frame data (engine parameters at time of default
State OBD check
Displays vehicle information (VIN # and calibration ID)
View live engine data parameters (PIDS)
O2 monitor test
OBD II drive cycle mode
Manufacturer specific diagnostic trouble codes
PROTOCOLS	CP9125	CP9410	CP9175	CP9180	CP9185	CP9190
CAN (all 2008 vehicles are required to use this protocol)
Keyword 2000, ISO-9142-2, J-1850 (VPW & PWM)
OBD I CABLES	CP9125	CP9410	CP9175	CP9180	CP9185	CP9190
OBD I cables for ‘84-’95 GM, Ford &‘89-’95 Chrysler vehicles

 indicates a feature available with purchase of optional cable(s).

Actron Elite AutoScanner Pro Kit includes CP9185 base tool, OBD II cable, GM OBD I ALDL cable, Ford OBD I MCU/EEC-IV cable, Chrysler OBD I SCI cable, USB cable, 8-foot extension cable, cigarette lighter adapter, blow molded hard case, manual CD and registration card. This Kit is designed to offer the ability to read domestic enhanced codes, graph engine data, record as well as playback stored vehicle information and the ability to print information through a PC. It displays trouble code information, MIL status, emissions readiness status and summary recap of the vehicle’s emissions status. This Kit reads, displays and erases generic, manufacturer specific as well as domestic enhanced Diagnostic Trouble Codes stored in the PCM. It resets check engine light and is CAN compliant.