ELM 327 Car Diagnostics USB Interface VAG-COM Cable For OBDII Protocols

ELM 327 Car Diagnostics USB Interface VAG-COM Cable For OBDII Protocols Review

ELM 327 Car Diagnostics USB Interface VAG-COM Cable For OBDII Protocols Feature

• The program lets you perform the following operations: Read diagnostic trouble codes, both generic and manufacturer- specific, and display their meaning (over 3000 generic code definitions in the database). Clear trouble codes and turn off the MIL ("Check Engine" light).
• Display current sensor data, including: - Engine RPM,Calculated Load Value, Coolant Temperature, Fuel System Status,Vehicle Speed, Short Term Fuel Trim, Long Term Fuel Trim, Intake Manifold Pressure, Timing Advance, Intake Air Temperature, Air Flow Rate, Absolute Throttle Position, Oxygen sensor voltages / associated short term fuel trims, Fuel System status, Fuel Pressure, Many others...
• Free software: Scantool.net, GM Mode 22 Scan Tool by Terry, OBD Gauge for PalmOS and Pocket PC by Dana Peters, OBD Logger by Jonathan Senkerik, OBD-II ScanMaster by Wladimir Gurskij (ScanMaster 3.52 - local copy), obd2crazy.com, OBD2 Scantool by Ivan Andrewjeski, OBDII for ELM322 by David Huffman, pyOBD by Donour Sizemore for MacOSX and Linux, RDDTC by Pete Calinski, Real Scan by Brent Harris, ScanTest for Pocket PC by Ivan Ganev aka a-ser, wOBD by WDT.
• Examples of VAG Compliant Vehicles:Alfa Romeo / Audi / BMW / Chevrolet / Chrysler / Citroen / Daewoo / Daihatsu / Datsun / Dodge / Fiat / Ford / Honda / Hyundai / Isuzu / Jaguar / Jeep / Kia / Lamborghini / Lancia / Land Rover / Lexus / Lotus / Mazda / Mercedes-Benz / MG / Mini / Mitsubishi / Nissan / Peugeot / Proton / Renault / Rover / Saab / Seat / Skoda / Smart / Subaru / Suzuki / Toyota / TVR / Vauxhall / Opel / Volkswagen / Volvo

# Output protocol: RS232.
# Baud rate: 9600 or 38400.
# Indicator LEDs: OBD Tx / Rx, RS232 Tx / Rx, Power.
# Operating voltage: 12V, internal protection from short circuits / overvoltages.
# Nominal idle current: 45 mA.

ELM 327 car diagnostics USB VAG-COM fault code interface cable for OBDII protocols.

START YOUR ENGINES!!! Turn you laptop into a powerful diagnostic station with the ultimate in DIY car maintenance products. Perform amazing real-time diagnostics of your own car, all you need is this ELM 327 USB to OBDII 16 pin interface cable, a laptop and your car. Feel the rush of instantly modifying settings and clearing errors in your vehicle from the comfort of your laptop computer. This USB enabled VAG-COM cable will save you a ton of money by enabling you to analyze your cars errors and view results within minutes. With just a laptop computer, this cable, and your favorite diagnostic software you can diagnose a multitude of car problems without the need of making a costly trip to the repair shop.

Capable of performing the simplest task such as reading and displaying codes plus monitoring real time data, to the most complex tasks like exporting data to spreadsheet, recording graph data, and much more. This VAG-COM interface cable makes a very handy tool to have in your garage, whether you are just an average car owner who does some of their own car maintenance to the true professional mechanic.

package content:
* 1 x Elm327 USB Interface
* 1 x CD software

Vag-Com USB Diagnostic Interface USB Cable KKL 409.1 OBD2 for Audi VW SEAT Volkswagen

Vag-Com USB Diagnostic Interface USB Cable KKL 409.1 OBD2 for Audi VW SEAT Volkswagen Review

Vag-Com USB Diagnostic Interface USB Cable KKL 409.1 OBD2 for Audi VW SEAT Volkswagen Feature

• VAG-COM (USB) KKL 409.1 Cable For Audi & VW OBD2/OBDII Interface
• Used for ISO9141 and KWP2000 Transmission Protocol used in Audi VW Skoda Seat
• Instructions Example: 1. Download shwareware software 409.1 2. Install the software onto your PC or copy to harddrive 3. Plug one end to OBD2 port on vehicle and other end to Laptop USB 4. Turn Ignition on. Do not start engine, only ignition on. 5. Start the VAG software and click options. Select the correct communication port. Use "test" to confirm and save. 6. Use the program to access control modules on your vehicle Windows 95, 98, ME, NT4, 2000, and XP. Does not support Windows Vista
• Fits 1996~2004 VAG with 16pin OBD II style Data Link Connector - Installation Guide: http://www.obdreaders.com/download/VAG-409.pdf
• Features included: Terminal K (Bus of communication) Terminal L (Ignition for waking up car computing system (ECU) OBD2 Interface for imported and domestic cars of all people in Europe, Audi, Skoda and the other including the red line of cars. Built-in microcomputer design, smart K line double conversion ISO/KWP, VPW, PMW K/L Diagnostic interface & cables work on ISO/KWP (Key Word Protocol) launched after 1996 only. Supports ISO9141 protocol The Cables may work with some versions of the Carsoft Specifications: Cord length: 1.5 m USB Waterproof circuit Antistatic ABS Plastic housing CD software

Car Model 80 100 200 A2 A3 A3 (8P) A4 (B7) A4 Cabriolet A6 A6 (C6/4F) A8 A8/A8L (D3/4E) Q7 S2 S3 TT Alhambra Altea Altea (5P) Arosa Cordoba Ibiza Inca Leon MK 1 Leon MK 2 Leon (1P) Toledo Toledo (5P) Fabia Felicia Octavia MK 1 Octavia MK 2 Octavia (1Z) Superb Beetle Bora Caddy Caddy (2K) Corrado Golf MK 2 Golf MK 3 Golf MK 4 Golf MK 5 (1K) Golf Plus Jetta MK 3 Jetta MK 4 Jetta MK 5 (1K) Lupo Passat MK 3 Passat MK 4 Passat MK 5 (B6) Passat MK 6 (B6) Phaeton Polo MK 3 Polo MK 4 Touran Touran (1T) Touareg Transporter T3 Transporter T4 Transporter T5

New Hot Car Code Reader Scanner Vw/audi Scan Tool Maxscan Vag405 VAG 405 OBD Ii OBD 2 Eobd2 with 4pcs Red Led Strip Gift

New Hot Car Code Reader Scanner Vw/audi Scan Tool Maxscan Vag405 VAG 405 OBD Ii OBD 2 Eobd2 with 4pcs Red Led Strip Gift Review

New Hot Car Code Reader Scanner Vw/audi Scan Tool Maxscan Vag405 VAG 405 OBD Ii OBD 2 Eobd2 with 4pcs Red Led Strip Gift Feature

• Advance features for VW, Audi, Seat & Skoda.
• Basic features (read, erase, freeze frame data.) for all other OBD2 & CAN-BUS vehicles.
• Read & erase trouble codes & reset service lights. It will perform these functions on engine, ABS, Airbags, transmission, radio, climate control, instruments, immobilizer & more.
• Turns off MIL Lights: engine, airbag, ABS, transmission & most other systems.
• Resets the Oil Service Light. etc

The MaxScan VAG405 code scanner is an OEM level diagnostic scan tool for most VW/AUDIs sold worldwide since 1990 to present INC CAN BUS.
Accurate, reliable and easy to use with friendly interface12, It can access MOST modules, the MaxScan VAG405 is a time saver and a money maker!
It also doubles up as a Generic OBD2 fault code reader for most other manufacturers. (Engine DTC Check)

Features & Benefit:
1. Works with Volkswagen and Audi (Audi/Seat/Skoda/Jetta/Golf/Beetle/Touareg/GTI/ Passat and more) sold worldwide since 1990
2. Reads and erases Diagnostic Trouble Codes (DTCs) of most electronically controlled vehicle modules, including Engine, ABS, Airbags, Transmission, Radio, Climate Control(A/C), Cent.Elect. Steering Wheel, Instruments, Immobilizer, etc.
3. Reads and clears generic trouble codes of cars using ISO 9141-2 ("CARB"), ISO 14230 ("KWP-2000") and ISO-15765 ("CAN") protocols.
4. C.A.N.(Controller Area Network) Capability
5. Retrieves vehicle information (VIN)
6. Displays I/M Readiness Status.
7. Displays DTC definitions on Unit Screen
8. Safely communicates with the on-board computers
9. Large, easy-to-read backlit LCD
10. Stand-alone unit with no need for an additional laptop computer to operate.This Tool performs as a FULL diagnostic tool for VAG range and as a Generic Fault Code Reader for other Vehicles that are OBD2 complient.

Compatible Vehicles:Works on OBD2 & CAN-BUS vehicles. Advanced features for most VW, Audi, Seat & Skoda vehicles sold worldwide since 1990. Jetta, Golf, Beetle, Touareg, GTI, Passat & more.

Red Led strip (15LED/30cm) could make your car look cool. Durable and suitable for exterior, front grille, rear trunk, vehicle body, under car body, interior, etc. Use in both outdoor and indoor.

Package includes:
1. Handheld Scanner
2. Nylon case
3. OBD2 Cable&USB Cable
4. User Manual
5. 4x 30cm Light Red Strip Car Lights Flexible

OBDII Pro Series Scan Tool AUL-AL510

OBDII Pro Series Scan Tool AUL-AL510 Review

Works on all 1996 and later OBD-II compliant US, European and Asian vehicles Easily determines the cause of the "Check Engine Light ( MIL)", utilizing all nine modes of OBD-II functionality Specialized continuous update screen for readiness monitors with an audible completion Retrieves generic (P0 and U0), manufacturer specific (P1, P3, and U1) codes, and pending codes Turns off Check Engine Light (MIL), clears codes and resets monitors Displays DTC definitions on unit screen Views freeze frame data Displays monitor test results and I/M readiness status (emissions) Identifies pending codes Live Data - Displays complete OBD-II vehicle data stream Displays live O2 sensor test data Reads, graphs, stores & playback live sensor data Memory/battery backup for off-vehicle data review and analysis Multilingual menu and DTC definitions - English, Spanish and French. Performs "modules present" test Retrieves vehicle information (VIN, CIN and CVN) Supports CAN (Controller Area Network) and all other current OBD-II protocols Built-in OBD-II DTC lookup library Large easy-to-read backlit LCD screen Free professional software updates via the Internet Data printing via PC

Auterra A-500 DashDyno SPD In-Vehicle Automotive Computer - Scan Tool, Performance Meter, and Data Logger

Auterra A-500 DashDyno SPD In-Vehicle Automotive Computer - Scan Tool, Performance Meter, and Data Logger Review

Auterra A-500 DashDyno SPD In-Vehicle Automotive Computer - Scan Tool, Performance Meter, and Data Logger Feature

• All 1996 and later vehicles supported, including American, Asian, and European
• Measures fuel economy, horsepower and torque, 0-60mph, 1/8 and 1/4 mile, and top speed
• Windows PC scan tool software included.
• Can be dash mounted or handheld - no hard wiring required
• Record GPS data using an external GPS receiver (not included)

DashDyno SPD is an in-vehicle mounted automotive computer that displays real time information about your vehicle's operation. Digital gauges, a trip computer, scan tool, performance meter and data logger are combined into one, easy-to-use instrument. A windshield suction cup mount with quick release makes installation a snap. 1996 or newer cars and trucks are supported. Simply plug DashDyno into the OBD II diagnostic port located under the dashboard. No hard wiring or tools are required for installation. The software is menu driven and wizards ask simple questions making multi-step operations quick and easy. The vehicle diagnostic connector powers the device and offers support for hundreds of different vehicle parameters like instant and average fuel economy, engine RPM, oxygen sensors, and air-fuel ratio. View all data in real time and simultaneously record up to 16 different vehicle parameters. Monitoring your driving habits and adjusting them can save on fuel costs. DashDyno has trip computers to record vehicle statistical data such as fuel economy. The green/yellow/red alarm lights can be individually configured to illuminate or flash if vehicle RPM, throttle position, or speed values exceed your preset limits. Each kit includes the Dyno-Scan for Windows PC scan tool software. This software opens files recorded by DashDyno or you can connect a laptop directly to your vehicle using a USB cable and the DashDyno PC pass-through mode. A simple loose gas cap can cause the vehicle Check Engine light to turn on. Save money and diagnose Check Engine light problems yourself by reading the diagnostic trouble code and turn off the light. Internal databases contain thousands of generic and enhanced code definitions so you'll know exactly what each code means. Vehicle horsepower/torque and acceleration times are measured and graphically displayed. DashDyno is a handheld, in-vehicle display and PC-based scan tool all-in-one.

ELM327 USB Car OBD OBD2 Trouble Scan Tool Codes Reader- For check engine light and other diagnostics

ELM327 USB Car OBD OBD2 Trouble Scan Tool Codes Reader- For check engine light and other diagnostics Review

ELM327 USB Car OBD OBD2 Trouble Scan Tool Codes Reader- For check engine light and other diagnostics Feature

• Read diagnostic trouble codes, both generic and manufacturer-specific , and display their meaning (over 3000 generic code definitions in the database)
• Clear trouble codes and turn off the MIL ("Check Engine" light)
• Set the maximum number of responses to obtain
• Remove spaces from ECU responses (to speed data transmission),Store a unique identifier in EEPROM
• Set the CAN mask and filter with one command. Easily switch between variable and fixed CAN message lengths, Send CAN remote frames (RTRs)

If your car's Check Engine Light is on, you need this device. interface is a pc device for reading and erasing trouble code in your vehicles. It can also display live data for your vehicle. Competitive in price and easy to use.

Even if you don't repair the vehicle yourself, knowing the Diagnostic Trouble Code number before taking the vehicle in for repair the less likely you will be ripped off. Once the vehicle is repaired, the Diagnostic Trouble Code(s) can be erased and the Check Engine light extinguished using this scan tool.

In area that requires a smog test, an illuminated Check Engine light fails the emission test, even if the repaired vehicle might otherwise pass inspection. This OBD II Scan Tool extinguishes the Check Engine light.

Features:
100% Brand New.
Function: USB ELM327 V1.5 OBD2 Diagnostic Scan
Main Feature:
-The newly developed USB scan tool.
- It supports all OBD-II protocols.
- Adopts the latest version 1.5
- Support New Style Chip with Power-saving Mode
- Retrieve Fault Codes (DTCs) and clear Check Engine lights.

Display current sensor data, including:
Engine RPM
Calculated Load Value
Coolant Temperature
Vehicle Speed
Fuel System Status
Short Term Fuel Trim
Long Term Fuel Trim
Intake Air Temperature
Intake Manifold Pressure
Timing Advance
Air Flow Rate
Absolute Throttle Position
Oxygen sensor voltages/associated short term fuel trims
Fuel Pressure and many others...

Package Contains:
1* ELM327 USB OBDII Car Diagnostic Scanner
1* CD

New B800 Bmw Srs Airbag Scan Reset Tool Scanner Resetter

New B800 Bmw Srs Airbag Scan Reset Tool Scanner Resetter Review

Features:
1.Displays all SRS fault codes, tells you what's wrong.
2.Resets the "SRS" Light.
3.Very, very easy to use
4.With user manual in the package.
5.LCD display:shows the test results
6.Enter button:confims a selection of a menu list.or returns to the main menu
7.SCroll button:scrolls through menu items or cancel operation
8.OBD II connector:connects the B800 to vehicle's data link connector

Specifications:
1.Main engine size:9.5x5x1.5cm
2.Weight:400g

package included:
1 x BMW Airbag Scan Reset Tool
1 x manual